Propex HS2000 Night Heater- Digital Thermostat

Propex HS2000 High Output gas Heater- New digital Controller Comes as standard with a single outlet kit Also available with double and treble outlet kits- Ask The Propex HS2800 heater is the big brother to the HS2000 heater. An automatic thermostatically controlled blown air heating system fuelled by Propane or Butane gas. Heatsource is designed for a variety of automotive and marine applications as a source of heat totally independent of the engine. Propex Heatsource blown air systems are used in many applications throughout the world, these include Motorhomes, Caravans, Boats. Both 12 and 24 volt versions are available. With forced air combustion and the Propex two stage stainless steel heat-exchanger, the HS2000 is a clean and highly efficient way to heat your vehicle or boat. Air for combustion is taken from outside and passed into the combustion chamber having been mixed with gas during three aeration stages, it is ignited automatically and heats up the large surface area of the heat-exchanger. The Heatsource units are totally room sealed and exhaust all products of combustion externally through the neat 26mm i.d. stainless steels flue pipe. To add to the efficiency, cabin air is normally re-circulated in preference to using cold air from outside. The HS series heaters are also very efficient on electrical current consumption, the high quality motor/fan combination and innovative current reducing electronics, both of which have been improved in the latest versions, means that even the larger HS2800 draws less than 2 amps during normal operation. Quiet Operation, Propex heaters are designed to be quiet in operation without compromising air throughput and heat output. There will always be some air noise from a system that produces a healthy throughput of air, however, by using high quality balanced fans and smooth enclosed motors with ball race bearings, noise is kept to a minimum. Safety, Heatsource blown air heaters conform to the latest European standards for both the appliance and the electronics and during the rigorous testing the focus is very much on safety. The HS2800 is are supplied with a complete fitting kit to suit either vehicle or marine applications. In vehicles and caravans the unit is usually mounted in a bed-box or cupboard, flued downwards through the floor and out to the side of the vehicle using flexible stainless ducting. Economy HS2800 Economy & Consumption Average consumption 225 grams/hour 3.9kg propane cylinder 17.5 hours 4.5kg butane 20.0 hours 13kg propane 58.0 hours 15kg butane 67.0 hours 19kg butane 84.5 hours 47kg butane 209.0 hours 904 Camping gaz (1.81kg) 8.0 hours 907 Camping gaz (2.72kg) 12.0 hours Technical Specifications hs2000 dims HS2800 Heat Input: 3.0kW Heat Output: 2.8kW Voltage: 12V or 24V versions Current Consumption: 1.9A continuous running Air Throughput: 85 C.F.M. Fuel: Butane or Propane Gas